‘MITSUBISHI-HITACHI’ (PRIMETALS) 2,300 mm Wide Hot Strip Mill
The Hot Strip Mill at JFE Steel’s Keihin district stands as a testament to cutting-edge steel production technology, boasting the capability to manufacture Japan's widest hot-rolled steel strip. Commissioned in 1979, the mill has been continually upgraded throughout the years to maintain its competitive edge. Production ceased in September 2023, leaving behind a legacy of excellence.
It features a Pair Cross Shift Mill for adaptive roll gap control to optimize thickness and shape. A key enhancement was the integration of a Sizing Press in 2009, which allows for variable strip widths while using slabs of constant width. This not only increases the productivity of the slab caster and reheating furnace upstream but also expands the range of products that can be manufactured efficiently.
Capable of rolling slabs measuring up to 2,300 mm in width, with thicknesses ranging from 160 to 250 mm, the Keihin HSM has an annual production capacity of approx. 4,000,000 tons. The mill processed low-carbon steel into a variety of products, from thin sheets for automotive bodies to thicker plates for line pipe applications.
Make: CHUGAIROKOGYO (Reheating Furnace)
MITSUBISHI-HITACHI-IHI (Rolling Mill)
Year of manufacture: 1979 (upgrades in 2000s, 2010s and 2020s)
Mothballed since: Ceased production in September 2023
Production capacity: approx. 4,000,000 tons per year (330,000 tons per month)
Rolling direction: Left to right (left hand line)
Processed material: Low carbon steel
Slab width: 600 – 2,300 mm
Slab thickness: 160 – 250 mm
Slab length: 5.0 – 9.1 meters
Slab weight: max. 36,000 kg
Strip width: 600 – 2,300 mm
Strip thickness: 1.2 – 25.4 mm
Strip length: up to 1,900 meters
Coil inner diameter: 762 mm
Coil outer diameter: max. 2,050 mm
Coil weight: max. 36,000 kg
Rolling speed: up to 1,159 mpm
REHEATING FURNACE
Make: CHUGAIROKOGYO
Purpose: Up to 1,200 °C slabs reheating
No. furnaces: 2
Type: Walking Beam (WB)
Capacity: 300 tph each
Dimensions: 57 meters length
9.8 meters width
Burners: 12 units per furnace
Axial flow + regeneration
Mixed gas fuel
SIZING PRESS
Make: MITSUBISHI HEAVY INDUSTRIES (2009)
Purpose: Enables a variety of widths with constant width of slabs (increase of caster and RHF productivity)
Width Reduction Capability: max. 370mm
Pressure Reduction Mechanism: Electric Screw Nut Type
Press Speed: 20 mpm
Main Machine: 3,400 kW
Number of mold stages: 2 stages
Conveyance speed: 150 mph
ROUGHING MILL ‘R2’
Make: IHI
Purpose: Rolled stock size reduction from 250 to 60 mm
Width is adjusted by vertical edge rolls
Type: 4-Hi Reversible, entry and exit edger
Main motor: AC 8,000 kW x 2
Max. load: 4,500 tons
ROUGHING MILL ‘R4’
Make: IHI
Purpose: Rolled stock size reduction from 60 to 40 mm
Type: 4-Hi Non-Reversible, entry edger
Main motor: AC 10,000 kW x 1
Max. load: 4,500 tons
Edge heater: C-type inductor type
CROPSHEAR and DESCALER
Make: MITSUBISHI-HITACHI
Purpose: Rolled stock end cropping and scale removal
Type: Crank shear
Cutting force: 656 tons
Motor capacity: DC 1,200 kW x 2
Updates: Crankshaft and gear updated in June 2015
Auxiliary equipment: Gamma Ray detector, Major Ring Roll
Chute Waste Disposal, CS Conveyor, Pit, Riff Mug
Descaler: 150 kg/cm2 pressurized water jet scale removal
FINISHING MILL (F1~F7)
Make: MITSUBISHI HEAVY INDUSTRIES
Purpose: Rolled stock size reduction from 40 down to
1.2 – 25.4 mm
Type: 4-Hi Continuous
Max. load: 5,000 tons
Rolling force: 5,900 kN/mm
Main motor: DC 8,400 kW (F1 and F2 stands)
AC 10,000 kW (F3 stand)
DC 8,400 kW (F4, F5 and F6 stands)
AC 8,400 kW (F7 stand)
RUN-OUT TABLE
Purpose: Hot strip is cooled by coolant water
Jetting device (top): 14,320 L/min flow rate per bank
Jetting device (bottom): 10,910 L/min flow rate per bank
DOWN COILER
Make: MITSUBISHI HEAVY INDUSTRIES x 2 (1979) #1 & #2
IHI x 1 (2013) #3
Purpose: Strip coiling and transferring to yard area
Type: 3-unit frame type
Coiling speed: max. 1,159 mpm
AUXILIARY SYSTEMS
Water collection pumps: 6- Vertical swirl type
0.4 MPa discharge Pressure
75 m3/min discharge flow
Purge pump: 2- Horizontal spiral discharge
650 m3/H flow rate; 200 meters lift
560 kW motor capacity
ELECTRICAL & AUTOMATION
WORKSHOP
SPARE PARTS
A spare parts list can be made available on demand.
***A more detailed description of the line and scope list is available on demand.
Download Documents
Sale Specific Terms
These terms are the sale specific terms as mentioned in article 1.1.18 of the terms and conditions below. This sale is a private treaty sale, as described in article 1.1.14 of the terms and conditions below. When a bid is accepted, a sales agreement will be made to be signed by the buyer and the seller. In the sales agreement, the buyer and seller will state the terms for payment and removal, that may deviate from the terms and conditions below.
Terms and conditions
The following terms and conditions ("terms") are the terms on which hilco industrial acquisitions bv (“hilco”), at jan van goyenkade 10-2, 1075 hp amsterdam, the netherlands, registered under the following number 60720700 at the chamber of commerce in amsterdam, sells equipment (defined below) at auctions (defined below) or by means of private treaty sales (defined below) and supersedes all other terms and conditions relating to the subject matter of these terms. These terms are the terms subject to which hilco shall, either on its own behalf or as agent for the vendor (defined below), sell equipment to a buyer (defined below) by way of auction or private treaty sale.
The buyer's attention is in particular drawn to the provisions of clause 8 and the buyer should note that:
All equipment is sold 'as is, where is' (with all faults, imperfections and defects) No guarantees and/or warranties are provided by hilco in respect of any equipment. It is the buyer's responsibility to inspect equipment prior to bidding on such equipment or making an offer in respect of such equipment. All sales are final – no exceptions. Sales may be subject to a buyer's premium (defined below), the rate of which will vary from sale to sale. All auctions (defined below) are subject to the conditions, valid in the country, where the auction takes place.
DEFINITIONS AND INTERPRETATION
The following words and phrases used in these Terms shall have the following meanings, except where the context clearly requires otherwise: "Advertising Material" means brochures, pamphlets, advertisements and any other marketing material (in both electronic and printed format) used by HILCO to market and promote the Auctions and/or any Private Treaty Sale;
