'PRODUCTION MACHINERY CO' Coil Preparation Line
‘PRODUCTION MACHINERY CO.’ Coil Preparation Line
Make: PRODUCTION MACHINERY CO. (USA)
Type: Coil Preparation Line
Year of manufacture: 1989
Application: The line ensures that the coils meet specific thickness, width, and mechanical properties requirements, facilitating smooth and efficient downstream processing. Steps included are uncoiling, flattening, edge trimming, welding, annealing, and recoiling.
Equipment weight (estimated): approx. 100 tons
Line overall length: approx. 34 meters
Line travelling direction: Left to right (left-hand line)
Processed material: Hot rolled stainless steel
AISI 300 and 400 series
Yield strength: 60 kg/mm2
Shear strength: 70 kg/mm2
Strip width: 600 – 1320 mm trimmed (1400 untrimmed)
Strip thickness: 3 – 6 mm
Coil weight: max. 20,000 kg
Coil inside diameter: 610 – 760 mm entry
610 exit
Coil outside diameter: min. 1000 mm
2000 entry and exit
max. 2200 mm incl. paper
Line speed: 20 – 60 mpm
Leader strip: max. 4 mm strip thickness
4 – 10 m lenght
Side trimmed scrap width: min. 12 mm
max. 40 mm
Mechanical equipment list:
– Entry Coil Storage Saddle
– Entry Coil Car
– Double Stub Pay Off Reel
– Hold Down Roll
– Coil Peeler
– Flattener
– NO.1 Strip Support Table
– Side Guide
– Entry Shear
– Leader Strip Transfer Unit
– No.2 Strip Support Table with Hump Roll
– Shear Welder
– Post Weld Annealing Unit
– No.3 Strip Support Table with Hump Roll
– No.4 Strip Support Table
– Exit Deflector Roll
– Exit Edge Guide Control
– Tension Reel
– Paper Unwinder
– Exit Coil Car
– Exit Coil Storage Saddle
E&A equipment and motor list:
– PLC CONTROLLOGIX (ROCKWELL, 2014)
– Drive POWERFLEX (ROCKWELL, 2014) x 3
– Automax Rack x 1 (RELIANCE)
– DCS Rack x 4 (RELIANCE)
– P.O.R. DC Motor 30KW 500V DC x 2
– Flattener DC Motor 37.5KW 500V DC x 1
– Scrap Chopper DC Motor 30KW 500V DC x 1
– Tension Reel DC Motor 75KW x 1
– AC Motor x 28
– Transformer 300KVA x 1
– Transformer 150KVA x 3
– Transformer 75KVA x 1
– Transformer 1000KVA x 1
– Plasma Welder (GUILD)
– Controller (THERMAL DYNAMICS)
– EPC (NORTH AMERICAN)
This lot is part of a combination lot: A Complete Stainless Steel Cold Rolling Facility(Combination)
Download Documents
Sale Specific Terms
These terms are the sale specific terms as mentioned in article 1.1.18 of the terms and conditions below. This sale is a private treaty sale, as described in article 1.1.14 of the terms and conditions below. When a bid is accepted, a sales agreement will be made to be signed by the buyer and the seller. In the sales agreement, the buyer and seller will state the terms for payment and removal, that may deviate from the terms and conditions below.
Terms and conditions
The following terms and conditions ("terms") are the terms on which hilco industrial acquisitions bv (“hilco”), at jan van goyenkade 10-2, 1075 hp amsterdam, the netherlands, registered under the following number 60720700 at the chamber of commerce in amsterdam, sells equipment (defined below) at auctions (defined below) or by means of private treaty sales (defined below) and supersedes all other terms and conditions relating to the subject matter of these terms. These terms are the terms subject to which hilco shall, either on its own behalf or as agent for the vendor (defined below), sell equipment to a buyer (defined below) by way of auction or private treaty sale.
The buyer's attention is in particular drawn to the provisions of clause 8 and the buyer should note that:
All equipment is sold 'as is, where is' (with all faults, imperfections and defects) No guarantees and/or warranties are provided by hilco in respect of any equipment. It is the buyer's responsibility to inspect equipment prior to bidding on such equipment or making an offer in respect of such equipment. All sales are final – no exceptions. Sales may be subject to a buyer's premium (defined below), the rate of which will vary from sale to sale. All auctions (defined below) are subject to the conditions, valid in the country, where the auction takes place.
DEFINITIONS AND INTERPRETATION
The following words and phrases used in these Terms shall have the following meanings, except where the context clearly requires otherwise: "Advertising Material" means brochures, pamphlets, advertisements and any other marketing material (in both electronic and printed format) used by HILCO to market and promote the Auctions and/or any Private Treaty Sale;
